DALI controller Touch Dim 3channel

DALI controller Touch Dim : 1.Over temperature protection 2.Support Touch DIM function, and can be dimmed manually 3.CE

 

Features:

 

PWM output current : MAX 5A/CHDALI Digital control input, Dimming control LED moduleAddressing output channelSupport Touch DIM function, and can be dimmed manuallyDimming range is from 0-100% (LED Will start from 1% )Used for DC Power supplyOver-temperature protectionSecurity level : 23 channels 12-24VDC constant voltage output

Model                                                                               DALI6003

Technical parameter:
Parameter	Min.*	Nom.*	Max.	Unit
Input voltage range	12	12-24	24	Vdc
Touch DIM AC input voltage range	5	-	290	VAC
Touch DIM AC input voltage frequency range	45	-	65	Hz
12-24 V DC Input current	-	-	5	A/ ch
Output power	0.1	3 x60-120	3 x120	W
Output voltage	12	12-24	24	Vdc
Output current	-	-	5	A/ ch
Peak current	-	-	6	A/ ch
Dimming control DALI definition	IEC62386IEC60929
Out casing temp	-	-	70	°C
Surrounding temp	-20	-	50	°C

*It’s available in 25°C indoor

Touch DIM function instructions:

1)        Short press the Touch DIM switch (<0.5s) to control the lamp on or off

2)        Long press the Touch DIM switch (>0.5s) to dim the brightness of light; The dimming direction will change every time after pressing switch

3)        When the light being turned off, long press the Touch DIM switch can turn on the light and adjust it’s brightness according to the dimming direction

4)        The brightness adjustment range is 1%-100%, and the light can be turned off through short pressing when do the adjustment with long pressing Touch DIM switch

5)        Power off memory function, the power-down state before will be maintained when power on again

Product installation notes:

1) Remark: DALI and TouchDIM functions cannot be used simultaneously, which can be controlled respectively by using DALI controllers or the equipments with TouchDIM function

2) Please read the connecting instruction picture before installation

3)    Please use the complete set of product according to the provided specification

4)    Please firstly pressure the cap end down in wire connecting process, then insert the thread of wire, and lastly check the wire is or not insert firmly

5)    In order to avoid the damage of the equipment, please check the connecting method is correct or not before connecting the power

DALI controller Touch Dim 3channel